Negotiable
The date of payment from buyers deliver within days
Chongqing
Long-term effective
2017-12-24 01:06
141
Company Profile
Chongqing Nakin Electromechanical Co., Ltd.By certification [File Integrity]
Contact:Mr. Derek(Mr.)
Email:
Telephone:
Phone:
Area:Chongqing
Address:Chongqing
Website: http://cn-oilpurifier.bcjax.com/
What Can It Do?
Suitable to all sorts of used lube oil from everywhere. This technology utilized catalyzing treatment during chemical processing. Our company developed a kind of composite catalyst, through catalyzing, the harmful substances are selectively processed, for example, polymerization, shielding, passivation effect and discharged as residues, so as to remove the unstable factors of the waste lubricating oil, make it became qualified lubricating base oil.
What Are The Features?
1. Easy to operate, low operation cost,high quality final oil with internation standard.
2. Environmentally friendly, without any secondary pollution, which can get the environmental protection standard in Singapore.
3. The machine can recycle any mineral oil, synthetic oil, such as ,gasoline oil, diesel oil, engine oil, rubber oil and other lubricant oil to clean oil.
4. High quality refined oil, no any discoloration caused by oxidation, no any bad smelling.
5. Low cost contain:
1) only need the catalyst chemical, the cost is less thanUS$30 to refine one ton waste oil.
2) Heat consumption: 105kcal per ton waste oil,enlarge heater to save much time!
3) Power consumption: 40Kwh to recycle 1 ton waste oil,adopt flash distillation to save much energy!
Component |
Percentage(%) |
water |
1.5% |
Gasoline/diesel oil |
7% |
Light Lubrication oil |
42% |
Heavy Lubrication oil |
43% |
Residue |
6.5% |
Total |
100%
|
Treated Oil Analysis (take the waste diesel engine oil for example)You Can Check The Test Report Pictures Later
Item |
Heavy Lube oil |
Light Lube Oil |
Appearance |
lucidity |
lucidity |
Color ≤ |
1.5 |
1 |
Viscosity (40°C)mm2/s |
49.57 |
26.86 |
Viscosity Index ≥ |
96 |
95 |
Anti-oxidation 150°C,min ≥ |
180 |
180 |
Deemulsification,54°C |
5min |
5min |
Flash Point(Open)°C ≥ |
228 |
224 |
Pour Point °C ≤ |
-12 |
-16 |
neutralization value (mgKOH/g) ≤ |
0.02 |
0.0 |
Index | Unit | JZC-2 | JZC-5 | JZC -10 | JZC -20 |
Capacity | Ton / day (24 hours) | 2 | 5 | 10 | 20 |
Recovery ratio | % | Above 85% | |||
Working pressure | MPa | ≤ 0.4 | |||
Working vacuum | MPa | -0.08 ~ -0.0998 | |||
Working Temperature | ºC | 80-350 | |||
Working Noise | dB (A) | 75 | |||
Power supply | V | 380v, 50hz, 3Phase (option) | |||
Heating way | Electric-Heater or boiler ( fuel, natural gas or coal) | Boiler (Fuel, natural gas or coal) | |||
Pump Motor Power | kW | 15 | 25 | 45 | 60 |
Working Size | m2 | 200 | 300 | 500 | 700 |
Final products | Ratio Percentages | Distillation temperature | Vacuum Value |
Water | 2% | 80-110 | -0.098 |
Gasoline and diesel | 8% | 120-210 | 500Pa |
Light base oil | 40% | 220ºC-290ºC | 300Pa |
Heavy base oil (Viscosity ≥SN150 ) | 45% | 300ºC-350ºC | 200Pa |
Oil Residual | 5% | ||
Total | 100% |